Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Top Up the Brake Fluid on the Peugeot Citystar 125?

Model: Peugeot Citystar 125
Part: Brake fluid

Video tutorial

To top up the brake fluid on the Peugeot Citystar 125, cover the handles and levers with a cloth to prevent them from getting dirty with oil. Next, loosen the two screws located on the plate next to the mirrors and remove the plate itself. Underneath, there will be another plate to remove by simply sliding it off: at this point, you can pour the oil into the hole until reaching the maximum level.

After topping up, reinsert the two plates and secure them with the screws previously removed.


Updated on 27 April 2026 by ScegliAuto


Related tutorials

How to Top Up the Brake Fluid on a Peugeot Citystar 125
How to Top Up the Brake Fluid on a Peugeot Citystar 125
Citystar 125 To top up the brake fluid on the Peugeot Citystar 125, loosen the two screws securing the rectangular cover next to the knob on the right of the stee…
How to Replace the Brake Fluid on a Peugeot Citystar 125?
How to Replace the Brake Fluid on a Peugeot Citystar 125?
Citystar 125 To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump th…
How to Remove the Fork of the Peugeot Citystar 125?
How to Remove the Fork of the Peugeot Citystar 125?
Citystar 125 To remove the fork of the Peugeot Citystar 125, you need to unscrew the nut that secures the central axle of the front wheel, allowing it to be compl…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos