Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil of the Peugeot Citystar 125

Model: Peugeot Citystar 125
Part: Engine oil

Video tutorial

To change the engine oil of the Peugeot Citystar 125, remove the oil drain plug located at the bottom of the bike between the stand and the rear wheel. Once the plug is removed, collect all the used oil in a suitably positioned container.

Then, top up the oil using a funnel, which should be inserted into the breather located on the right side of the bike, near the start of the exhaust. After adding the correct amount of oil, check that everything is functioning correctly.


Updated on 11 July 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Peugeot Citystar 125?
How do you replace the engine oil of the Peugeot Citystar 125?
Citystar 125 In order to replace the engine oil of the Peugeot Citystar 125, you need to loosen the drain plug in the central lower part of the motorcycle: once t…
Engine Oil Change on Peugeot Citystar 125
Engine Oil Change on Peugeot Citystar 125
Citystar 125 In this video tutorial, you will see how to change the engine oil on a Peugeot Citystar 125. First, position your scooter upright on its stand: then,…
How to Top Up the Brake Fluid on the Peugeot Citystar 125?
How to Top Up the Brake Fluid on the Peugeot Citystar 125?
Citystar 125 To top up the brake fluid on the Peugeot Citystar 125, cover the handles and levers with a cloth to prevent them from getting dirty with oil. Next, l…

How to Replace the Headlight Bulbs on a Kawasaki ZX-10R

In this tutorial, you will see how to replace the headlight bulbs on a Kawasaki ZX-10R, a very simple and quick operation. Before proceeding, ensure the key is not inserted for safety. Start by locating the circular cap at the rear of the headlamp, then unscrew it and disconnect the power connector. Next, release the metal clip, extract the old bulb from the housing, and without touching the glass directly with your bare hands, insert the replacement. Finally, reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos