Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Engine Oil Change on Peugeot Citystar 125

Model: Peugeot Citystar 125
Part: Engine oil

Video tutorial

In this video tutorial, you will see how to change the engine oil on a Peugeot Citystar 125. First, position your scooter upright on its stand: then, using a socket spanner, remove the oil drain plug located at the bottom, allowing all the old oil to drain into a container.

Next, screw the plug back in by hand and then tighten it with the spanner; now add the new engine oil (of the specific type) and pour it into the designated hole near the exhaust; remove the dipstick and pour in the oil, as shown in the video!


Updated on 27 March 2026 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Peugeot Citystar 125?
How do you replace the engine oil of the Peugeot Citystar 125?
Citystar 125 In order to replace the engine oil of the Peugeot Citystar 125, you need to loosen the drain plug in the central lower part of the motorcycle: once t…
How to Change the Engine Oil of the Peugeot Citystar 125
How to Change the Engine Oil of the Peugeot Citystar 125
Citystar 125 To change the engine oil of the Peugeot Citystar 125, remove the oil drain plug located at the bottom of the bike between the stand and the rear whee…
How to Replace the Brake Fluid on a Peugeot Citystar 125?
How to Replace the Brake Fluid on a Peugeot Citystar 125?
Citystar 125 To replace the brake fluid on a Peugeot Citystar 125, you need to connect the tube to the corresponding brake caliper: this will allow you to pump th…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos