Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the headlight bulb of the MV Agusta Brutale 800RR?

Model: Mvagusta Brutale 800
Part: Headlight bulb

Video tutorial

In order to replace the front headlight of the MV Agusta Brutale 800, you need to loosen the screws that secure the corresponding optical group: these screws will be located on the sides and below the headlight. Once the screws have been unscrewed, it will be possible to remove the optical group from its seat and disconnect the connector located inside it; at this point, it will be possible to remove the bulb inside it, so that the new one can be inserted.

The headlight can now be fixed with the appropriate screws to ensure that everything works correctly.


Posted on 14 December 2024 by ScegliAuto


Related tutorials

How do you change the engine oil of the MV Agusta Brutale 800RR?
How do you change the engine oil of the MV Agusta Brutale 800RR?
Brutale 800 The oil change for the MV Agusta Brutale 800RR can be performed by completely unscrewing the drain plug of the oil pan, which will be located in the …
How to Replace the Air Filter on the MV Agusta Brutale 800RR?
How to Replace the Air Filter on the MV Agusta Brutale 800RR?
Brutale 800 To replace the air filter on the MV Agusta Brutale 800RR, loosen the screws securing the seat to its housing so that it can be removed. Once the seat…
How to Replace the Air Filter on the MV Agusta Brutale 800RR
How to Replace the Air Filter on the MV Agusta Brutale 800RR
Brutale 800 To replace the air filter on the MV Agusta Brutale 800RR, loosen the screws that secure the seat to its housing so that it can be completely removed.…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos