|
Do it yourself
| |||
| ||||
How to Install the Stand on a Piaggio Zip?
Model: Piaggio Zip
Video tutorial
To install the stand on the Piaggio Zip, insert the support plate into the hole located at the bottom of the scooter. Once the plate is positioned, insert the bolt at the top of the stand into the hole of the plate. After the bolt is inserted, tighten the corresponding nut until the stand is securely fixed to the bottom of the scooter. After installing the stand, check that it moves correctly and can support the scooter.
Updated on 2 May 2026 by ScegliAuto
Related tutorials
Zip
Below are the steps to remove and replace the voltage regulator on the Piaggio Zip scooter. First, place the scooter on its stand and start by removi…
Zip
To install the windscreen on the Piaggio Zip, insert the appropriate fixing rods into their respective slots located at the bottom of the front fairi…
Zip
In this brief guide, discover the instructions that will allow you to remove and replace the instrument cluster lights on the Piaggio Zip in simple s…
|
How to Change the Engine Oil on a Kawasaki Ninja 500?
This tutorial shows how to change the engine oil on a Kawasaki Ninja 500, a simple and quick task. First, wait for the engine to cool down sufficiently, then place a container underneath and remove the lower fairing. Next, locate the drain bolt, unscrew it using a 17mm hex key, and let all the oil drain from the system. Proceed by unscrewing the old filter, tightening the new one, and reassembling everything. Finally, pour in the new oil through the designated upper hole. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.040
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
