Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Beta RR 350?

Model: Beta Rr 350
Part: Engine oil

Video tutorial

To replace the engine oil of the Beta RR 350, you need to loosen the drain plug located in the central lower part of the bike: this way you will be able to drain all the used oil into a properly positioned container. Once the oil has drained, you can also remove the oil filter located in the same area; at this point, you can insert the new replacement part and proceed with topping up. You will need to add the necessary amount of oil to the respective tank, making sure everything is functioning properly.


Posted on 22 December 2024 by ScegliAuto


Related tutorials

How to Remove the Engine Oil from a Beta RR 350
How to Remove the Engine Oil from a Beta RR 350
Rr 350 Before you begin, run the engine of your Beta RR 350 for a few minutes, then position it on the side stand. Start by removing the lower cover that pr…
How to Change the Engine Oil on a Beta RR 350?
How to Change the Engine Oil on a Beta RR 350?
Rr 350 You can change the engine oil on a Beta RR 350 by loosening the drain plug located at the central lower part of the vehicle: once this plug is remove…
How do you replace the engine oil of the Beta RR 350?
How do you replace the engine oil of the Beta RR 350?
Rr 350 The operation of replacing the engine oil on the Beta RR 350 can be carried out by loosening the drain plug located in the central lower part of the …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos