Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How do you replace the engine oil of the Beta RR 350?

Model: Beta Rr 350
Part: Engine oil

Video tutorial

The operation of replacing the engine oil on the Beta RR 350 can be carried out by loosening the drain plug located in the central lower part of the vehicle: in this way it will be possible to collect all the used oil inside a properly positioned container.

Once the oil has been completely drained, it will also be possible to remove the oil filter located in the same position; at this point, the new replacement part can be inserted and the top-up can be carried out. The necessary amount of oil must be inserted into the respective tank, checking its operation.


Posted on 25 January 2025 by ScegliAuto


Related tutorials

How to Remove the Engine Oil from a Beta RR 350
How to Remove the Engine Oil from a Beta RR 350
Rr 350 Before you begin, run the engine of your Beta RR 350 for a few minutes, then position it on the side stand. Start by removing the lower cover that pr…
How to Replace the Engine Oil and Oil Filter on the Beta RR 350
How to Replace the Engine Oil and Oil Filter on the Beta RR 350
Rr 350 Today, you will see the necessary steps to replace the engine oil and oil filter while performing routine maintenance on the Beta RR 350 motorcycle. …
How do you replace the engine oil of the Beta RR 350?
How do you replace the engine oil of the Beta RR 350?
Rr 350 To replace the engine oil of the Beta RR 350, you need to loosen the drain plug located in the central lower part of the bike: this way you will be a…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos