Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on the Beta RR 350

Model: Beta Rr 350
Part: Engine oil

Video tutorial

Today, you will see the necessary steps to replace the engine oil and oil filter while performing routine maintenance on the Beta RR 350 motorcycle. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover, removing and replacing the cartridge with a new one, as shown in the video.

At this point, unscrew the filler cap and pour in the new engine oil, ensuring it has the correct specifications!


Updated on 25 May 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil and Oil Filter on a Beta RR 350
How to Change the Engine Oil and Oil Filter on a Beta RR 350
Rr 350 This guide explains how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 350 enduro motorcycle. First, place …
How to Service the Beta RR 350
How to Service the Beta RR 350
Rr 350 This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bi…
How to Perform Routine Maintenance on the Beta RR 350
How to Perform Routine Maintenance on the Beta RR 350
Rr 350 Today, we will discover the steps on how to perform routine maintenance, replacing the engine oil, oil filter, and air filter of the Beta RR 350 endu…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos