Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Service the Beta RR 350

Model: Beta Rr 350
Part: Engine oil

Video tutorial

This video will illustrate the steps to perform the routine maintenance service, replacing the engine oil and oil filter on the Beta RR 350 enduro bike. First, place the bike on a stand and start by loosening the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then clean the small oil filter (replacing it with a new one if too dirty).

Finally, top up with new oil, of the correct type for your engine, filling to the maximum level!


Updated on 6 July 2026 by ScegliAuto


Related tutorials

How to Perform Routine Maintenance on the Beta RR 350
How to Perform Routine Maintenance on the Beta RR 350
Rr 350 Today, we will discover the steps on how to perform routine maintenance, replacing the engine oil, oil filter, and air filter of the Beta RR 350 endu…
How to Change the Engine Oil and Oil Filter on a Beta RR 350
How to Change the Engine Oil and Oil Filter on a Beta RR 350
Rr 350 This guide explains how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 350 enduro motorcycle. First, place …
How to perform a full maintenance on the Beta RR 350
How to perform a full maintenance on the Beta RR 350
Rr 350 These short and simple steps will show us how to perform a complete maintenance of the Beta RR 350 enduro motorcycle, specifically on the engine and …

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos