Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil and Oil Filter on a Beta RR 350

Model: Beta Rr 350
Part: Engine oil

Video tutorial

This guide explains how to perform routine maintenance by replacing the engine oil and oil filter on the Beta RR 350 enduro motorcycle. First, place the bike on its stand and start by unscrewing the oil drain bolt located under the engine, using a socket spanner, allowing it to drain into a container for about ten minutes; then unscrew the screws of the oil filter cover to remove and replace the cartridge with a new one of the correct type, as shown in the video.

Use the appropriate engine oil specified in the motorcycle's user and maintenance manual!


Updated on 20 May 2026 by ScegliAuto


Related tutorials

How to Replace the Engine Oil and Oil Filter on the Beta RR 350
How to Replace the Engine Oil and Oil Filter on the Beta RR 350
Rr 350 Today, you will see the necessary steps to replace the engine oil and oil filter while performing routine maintenance on the Beta RR 350 motorcycle. …
How do you replace the engine oil of the Beta RR 350?
How do you replace the engine oil of the Beta RR 350?
Rr 350 The operation of replacing the engine oil on the Beta RR 350 can be carried out by loosening the drain plug located in the central lower part of the …
How do you replace the engine oil of the Beta RR 350?
How do you replace the engine oil of the Beta RR 350?
Rr 350 To replace the engine oil of the Beta RR 350, you need to loosen the drain plug located in the central lower part of the bike: this way you will be a…

How to Change the Engine Oil in a Suzuki DR 350?

In this tutorial, you will see how to change the engine oil in a Suzuki DR 350, a very simple and quick operation. First, wait until the engine is cold enough, then remove the protective frame located at the bottom. Next, position a container underneath the bike, disconnect the indicated hose, and let all the oil in the system drain out. Then, open the filter housing by unscrewing the three bolts with an 8mm spanner, remove the old filter, and insert the replacement. At this point, you can reassemble everything and pour in the new oil through the designated hole.

Watch the video!


by ScegliAuto

More videos