Do it yourself
Frequently asked questions about cars and motorcycles

How to Change the Engine Oil of the Piaggio Liberty 150 S

Model: Piaggio Liberty 150 S
Part: Engine oil

Video tutorial

Today's procedure will show you how to change the engine oil while performing routine maintenance on the Piaggio Liberty 150 S scooter. First, place the scooter on its central stand and begin to unscrew the oil drain bolt located under the engine, allowing the oil to drain into a container for about ten minutes; then clean the small oil filter or replace it if necessary, as shown in the video.

At this point, unscrew the filler cap and top up with new engine oil, pouring in the correct amount of oil!


Updated on 12 November 2026 by ScegliAuto


Related tutorials

Liberty 150 S To change the engine oil on the Piaggio Liberty 150 S, unscrew the bolt located at the bottom of the bike to open the oil drain plug. This will allow…
Liberty 150 S To change the engine oil of the Piaggio Liberty 150 S, loosen the drain plug of the oil sump, located at the central lower part of the vehicle: when …
Liberty 150 S In this tutorial, you will see how to change the engine oil on a Piaggio Liberty 150 scooter, an extremely simple and quick operation. First, ensure …

How to Replace the Air Filter on a Ducati Multistrada 1260

Briefly, here are the instructions to dismantle and replace the engine air filter on a Ducati Multistrada 1260. First, place the motorcycle on the centre stand and begin by removing the fuel tank by unscrewing the fixing screws; then disconnect the electrical connector found underneath and the fuel line. At this point, remove the cover of the air filter box, taking out and replacing the cartridge with the new one; insert it in the correct orientation and reassemble the filter box, finally reinstalling the fuel tank!

Watch the video!


by ScegliAuto

More videos