Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
On board the Yamaha Xmax 125, the V-Belt indicator light can be reset by turning on the instrument panel, inserting the ignition key into its block: once the instrument panel is turned on, it will be possible to disconnect the panels located in the front left side. Here below it will be possible to locate a connector, which must be disconnected for five seconds, as shown in the relevant tutorial; once this time has elapsed, it will be possible to reconnect the connector so that the light turns off completely. At the end of the procedure, it will be possible to turn off the instrument panel permanently.

Posted on 21 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
How do you reset the V-Belt indicator light on the Yamaha Xmax 125?
Xmax 125 On the Yamaha Xmax 125, the reset operation of the V-Belt warning light involves inserting the key into the ignition switch and turning it to turn on…
How to reset the V-Belt warning light on the Yamaha Xmax 125?
Xmax 125 To reset the V-Belt warning light on the Yamaha Xmax 125, you need to turn on the instrument panel by inserting the ignition key into the ignition sw…
How to reset the V-Belt light on the Yamaha Xmax 125?
Xmax 125 .. To reset the V-Belt light on the Yamaha Xmax 125, insert the key into the ignition barrel and turn it to switch on the.. …

How to Replace the Tyres on the Husaberg FE 450

In this guide, follow the instructions to remove and replace the tyres on the Husaberg FE 450 enduro bike. First, place the bike on a stand and lift the wheel off the ground; then, undo the bolts securing the brake caliper to remove it, as shown in the video. Next, unscrew the central axle of the wheel, removing the tyre from the rim (deflating it and using levers); then install the new tyre, ensuring it has the correct dimensions, following the video tutorial to the end!

Watch the video!


by ScegliAuto

More videos