|
Do it yourself
| |||
| ||||
Model: Triumph Bobber
To replace the engine oil on the Triumph Bobber, loosen the screw that secures the drain plug of the tank to its housing, allowing you to collect the used oil in a suitably positioned container. When all the oil has drained out, you can also remove the oil filter located in the same position as the plug, so it can be replaced with a new one. At this point, you can top up by inserting the new oil through the breather located on the top of the casing on the right side of the bike.
Updated on 7 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Bobber
In this tutorial, you will learn how to change the engine oil in the Triumph Bobber, a very simple and quick operation. First, ensure the engine is s…
Bobber
In order to replace the battery of the Triumph Bobber, you need to loosen the screws that secure the battery housing, located on the left side of the…
Bobber
To replace the air filter on the Triumph Bobber, loosen the screws located on the cover on the right side of the bike. By loosening these two screws,…
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.005
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
