Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Triumph Bobber?

Model: Triumph Bobber
Part: Engine oil

Video tutorial

To replace the engine oil of a Triumph Bobber, start by making sure that the motorcycle is positioned on a stable and flat surface, preferably using a stand to keep it in a vertical position. Before proceeding, start the engine for a few minutes to warm up the oil and make it more fluid.

Once the engine is turned off, locate the drain plug under the engine and place a suitable container to collect the used oil. Unscrew the plug with a suitable wrench and let the fluid drain completely. Once the old oil has been drained, clean the threading of the plug carefully and reinstall it, tightening it with the correct torque.

Finally, remove the top cap of the oil tank, pour in the specified amount as indicated in the manual, and check the level with the dipstick. Finish by starting the motorcycle for a moment and checking for any leaks.


Posted on 8 November 2025 by ScegliAuto


Related tutorials

How to change the engine oil in the Triumph Bobber?
How to change the engine oil in the Triumph Bobber?
Bobber In this tutorial, you will learn how to change the engine oil in the Triumph Bobber, a very simple and quick operation. First, ensure the engine is s…
How to Change the Engine Oil in a Triumph Bobber?
How to Change the Engine Oil in a Triumph Bobber?
Bobber In this tutorial, you will see how to change the engine oil in a Triumph Bobber, a very simple and quick operation. First, ensure the engine is suffi…
How to replace the engine oil on the Triumph Bobber?
How to replace the engine oil on the Triumph Bobber?
Bobber To replace the engine oil on the Triumph Bobber, loosen the screw that secures the drain plug of the tank to its housing, allowing you to collect the…

How to Reset the Service Light on a KTM Super Duke 1290 R

This tutorial shows how to reset the service light on a KTM Super Duke 1290 R, a very simple and quick operation. Before proceeding, ensure that you have completed the required scheduled maintenance. Start by inserting the key and turning on the instrument panel, then navigate to the general menu, move the selector to "Options" and press the two indicated buttons. Adjust the two intervals using the directional arrows, return to the main screen, and restart the panel to verify that the reset was successful.

Watch the video!


by ScegliAuto

More videos