Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil in a Triumph Bobber?

Model: Triumph Bobber
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil in a Triumph Bobber, a very simple and quick operation. First, ensure the engine is sufficiently cool for safe operation, then position a container underneath the bike, locate the drain hole bolt, and unscrew it using an 8mm hex key. Allow all the oil in the system to drain out, unscrew the old filter, and tighten both the replacement and the bolt.

At this point, simply pour the required amount of oil through the designated upper hole.


Posted on 3 November 2026 by ScegliAuto


Related tutorials

How to change the engine oil in the Triumph Bobber?
How to change the engine oil in the Triumph Bobber?
Bobber In this tutorial, you will learn how to change the engine oil in the Triumph Bobber, a very simple and quick operation. First, ensure the engine is s…
How to replace the engine oil on the Triumph Bobber?
How to replace the engine oil on the Triumph Bobber?
Bobber To replace the engine oil on the Triumph Bobber, loosen the screw that secures the drain plug of the tank to its housing, allowing you to collect the…
How to Replace the Headlamp on a Triumph Bobber?
How to Replace the Headlamp on a Triumph Bobber?
Bobber In this tutorial, you will see how to replace the headlamp on a Triumph Bobber, an extremely simple and quick operation. First, ensure that the key i…

How to replace the battery in the Royal Enfield Interceptor 650?

In this tutorial, you will see how to replace the battery in the Royal Enfield Interceptor 650, a very simple and quick operation. First, ensure that the key is not inserted, then remove the small right side fairing and take off the plastic panel underneath it. Next, unscrew the bolts of the power terminals, disconnect them starting with the negative, and unclip the securing strap. At this point, simply unscrew the lower bolt, remove the battery from its housing, and fit the replacement by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos