Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the battery in the Royal Enfield Interceptor 650?

Model: Enfield Interceptor 650
Part: Battery

Video tutorial

In this tutorial, you will see how to replace the battery in the Royal Enfield Interceptor 650, a very simple and quick operation. First, ensure that the key is not inserted, then remove the small right side fairing and take off the plastic panel underneath it. Next, unscrew the bolts of the power terminals, disconnect them starting with the negative, and unclip the securing strap.

At this point, simply unscrew the lower bolt, remove the battery from its housing, and fit the replacement by following the reverse procedure.


Updated on 3 November 2026 by ScegliAuto


Related tutorials

How to Replace the Battery of the Royal Enfield Interceptor 650?
How to Replace the Battery of the Royal Enfield Interceptor 650?
Interceptor 650 To replace the battery of the Royal Enfield Interceptor 650, remove the two chrome covers located on the sides of the bike, just below the seat. Unde…
How to Replace the Battery in the Royal Enfield Interceptor 650?
How to Replace the Battery in the Royal Enfield Interceptor 650?
Interceptor 650 You can replace the battery in the Royal Enfield Interceptor 650 by loosening the screws that secure the side cover panel, located just under the fue…
How to replace the engine oil in the Royal Enfield Interceptor 650?
How to replace the engine oil in the Royal Enfield Interceptor 650?
Interceptor 650 In this tutorial, we can see how to replace the engine oil in the Royal Enfield Interceptor 650, an extremely simple and quick operation. First of al…

How to Replace the Stator on the Derbi Senda 125?

To replace the stator on the Derbi Senda 125, you need to access the protection panel located on the left side of the bike, at the lower part. Under this panel, you will find the stator cover, which must be removed by loosening its fastening bolts; this will allow you to take out the stator underneath by disconnecting the relevant power cables. After removing the old stator, you can insert the new one, covering everything with the corresponding cover and also installing the relevant side panel.

Watch the video!


by ScegliAuto

More videos