Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Ossa
    3. : Phantom 125

Model: Ossa Phantom 125
Part: Engine

To dismantle the engine of the Ossa Phantom 125, loosen the bolts securing the engine block to its housing. This will allow you to loosen the bolts fixing the cylinder at its top and remove it completely. Now, the piston can also be detached from its conrod by removing the corresponding ring and pin. At this point, open the lower cover and remove all additional components inside; after replacing the necessary parts, you can reassemble the engine and secure it back in its place.

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to remove the engine from a Malaguti Phantom F12 100?
How to remove the engine from a Malaguti Phantom F12 100?
Phantom F12 125 To remove the engine from a Malaguti Phantom F12 125, you need to completely detach the engine block from its housing by loosening the screws that se…
How to Dismantle the Engine of the Malaguti Phantom F12 125
How to Dismantle the Engine of the Malaguti Phantom F12 125
Phantom F12 125 You can dismantle the engine of the Malaguti Phantom F12 125 by loosening the screws that secure the block to its housing in the central lower part o…
How do you disassemble the engine of the Malaguti Phantom F12 125?
How do you disassemble the engine of the Malaguti Phantom F12 125?
Phantom F12 125 In order to disassemble the engine of the Malaguti Phantom F12 125, you need to loosen the screws that secure the cylinder to the top of the engine b…

How to reset the oil change light on a Suzuki Burgman 650

Reset the service light on a Suzuki Burgman 650 after completing the required services: First, turn on the ignition. Then, press the button on the left of the instrument panel four times until the mileage until the next service appears. Hold it down for a couple of seconds. On the right side of the instrument panel, there is another button. Press this for a couple of seconds, and the oil light will start to flash. Use the left button to gradually decrease the mileage until you reach the distance at which you want to change the oil again. The YouTuber sets it to 3,000 miles. To confirm, press and hold the left button, and the reset is complete.

Watch the video!


by ScegliAuto

More videos