Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Remove the Fuel Tank from a Triumph Tiger 800 XC

Model: Triumph Tiger 800 Xc
Part:

Video tutorial

To remove the fuel tank from the Triumph Tiger 800 XC, first loosen the screws located just under the handlebars. Additional screws to loosen will be found at the front of the fairing, immediately to the sides and below the front headlamp.

This will allow you to remove the front fairing; then, remove the side fairings by loosening the corresponding bolts, and perform the same operation for the seat. Once all these parts have been removed, you can loosen the screws securing the tank and remove it from its housing after disconnecting the connectors.


Updated on 16 May 2026 by ScegliAuto


Related tutorials

How to Remove the Fuel Tank from the Triumph Tiger 800?
How to Remove the Fuel Tank from the Triumph Tiger 800?
Tiger 800 Xc To remove the fuel tank from the Triumph Tiger 800, first detach the plastic covers that wrap around the sides of the fuel tank to access the side fi…
Replacing the Coolant on the Triumph Tiger 800
Replacing the Coolant on the Triumph Tiger 800
Tiger 800 Xc This guide shows you how to bleed the cooling circuit and replace the antifreeze on a Triumph Tiger 800. First, disconnect the coolant hose; then loo…
Replacing the Starter Motor on a Triumph Tiger 800 XC
Replacing the Starter Motor on a Triumph Tiger 800 XC
Tiger 800 Xc In this video tutorial, follow the main instructions to remove the starter motor from a Triumph Tiger 800 XC. The starter motor is located under the …

How to replace the drive belt on the Yamaha Xmax 300

Here are the instructions for removing and replacing the drive belt on the Yamaha Xmax 300 scooter. First, place the scooter on its centre stand and start unscrewing all the screws securing the transmission cover, which are located on the sides; then unscrew the central nut of the fan and subsequently that of the clutch bell, as shown in the video. Once the components are removed, take out and replace the drive belt with a new one; reassemble or replace the entire clutch pack if necessary.

Watch the video!


by ScegliAuto

More videos