Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
This guide provides instructions on how to remove and replace the rear cushions of the Moto Guzzi V35 II, following these simple steps. First, place your motorcycle on the centre stand and begin by unscrewing the central bolt of the rear wheel; remove the screws from the exhaust silencer, taking it off as shown in the video. Now, remove the cushion cover and replace it with the original cushions; finally, reassemble everything by following the reverse procedure of disassembly!

Updated on 2 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Final Drive on a Moto Guzzi V35 II
How to Remove the Final Drive on a Moto Guzzi V35 II
V35 Ii In this tutorial video, learn how to remove and replace the final drive on a Moto Guzzi V35 II by following the instructions below. First, place your…
How do you replace the motor oil of the Moto Guzzi V35II?
How do you replace the motor oil of the Moto Guzzi V35II?
V35 Ii In order to replace the engine oil of the Moto Guzzi V35II, you need to loosen the drain plug located in the central lower part of the vehicle, near …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos