Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the muffler of the Husaberg FE 390, you need to loosen the screws that secure the muffler cover panel, located near the fender: this can now be removed from its housing in order to locate the screws that secure the exhaust terminal underneath its seat. These screws can be unscrewed and subsequently widen the fixing ring between the muffler and the collector: it is now necessary to release the terminal present here so that it is possible to insert the new one, fixing and connecting it properly.

Posted on 8 November 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Husaberg FE 390?
How do you replace the exhaust pipe of the Husaberg FE 390?
Fe 390 The replacement of the exhaust of the Husaberg FE 390 can be done by loosening the screws that secure the side panel of the fender: this will be on t…
How do you replace the exhaust pipe of the Husaberg FE 390?
How do you replace the exhaust pipe of the Husaberg FE 390?
Fe 390 To replace the exhaust of the Husaberg FE 390, you need to loosen the screws that hold the right fender panel: once these screws are loosened, you ca…
How do you replace the muffler of the Husaberg FE 390?
How do you replace the muffler of the Husaberg FE 390?
Fe 390 In order to replace the muffler on the Husaberg FE 390, you need to loosen the screws that secure the side panel in the rear of the motorcycle, near …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos