|
Do it yourself
| |||
| ||||
|
Model: Husaberg Fe 390
To replace the exhaust of the Husaberg FE 390, you need to loosen the screws that hold the right fender panel: once these screws are loosened, you can remove the panel and locate the exhaust. The screws supporting it must be completely loosened and then you can widen the ring that connects the exhaust manifold to the terminal: in this way you can position the new exhaust in place, fixing it with the supports and then covering everything with the panel.
Posted on 16 July 2025 by ScegliAuto
Video tutorial
Related tutorials
Fe 390
The replacement of the exhaust of the Husaberg FE 390 can be done by loosening the screws that secure the side panel of the fender: this will be on t…
Fe 390
To replace the muffler of the Husaberg FE 390, you need to loosen the screws that secure the muffler cover panel, located near the fender: this can n…
Fe 390
In order to replace the muffler on the Husaberg FE 390, you need to loosen the screws that secure the side panel in the rear of the motorcycle, near …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.007
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |