Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Stator on the Derbi Senda 125?

Model: Derbi Senda 125
Part: Checks and maintenance

Video tutorial

To replace the stator on the Derbi Senda 125, you need to access the protection panel located on the left side of the bike, at the lower part. Under this panel, you will find the stator cover, which must be removed by loosening its fastening bolts; this will allow you to take out the stator underneath by disconnecting the relevant power cables.

After removing the old stator, you can insert the new one, covering everything with the corresponding cover and also installing the relevant side panel.


Updated on 2 August 2026 by ScegliAuto


Related tutorials

How do you disassemble the engine of the Derbi Senda 125?
How do you disassemble the engine of the Derbi Senda 125?
Senda 125 To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixi…
How to Replace the Exhaust on a Derbi Senda 125?
How to Replace the Exhaust on a Derbi Senda 125?
Senda 125 To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
How do you replace the muffler on the Derbi Senda 125?
How do you replace the muffler on the Derbi Senda 125?
Senda 125 It will be possible to replace the exhaust of the Derbi Senda 125 by loosening the screws that secure it to its housing: first, you will need to remo…

How to replace the transmission oil in the KTM Exc 300

Today, let's discover how to carry out the routine maintenance service by replacing the transmission oil in the two-stroke enduro bike KTM Exc 300. First, place your bike on a stand and start by unscrewing the oil drain bolt located under the engine, allowing the gearbox oil to drain into a container for about ten minutes; then clean the small mesh oil filter, as shown in the video. At this point, unscrew the filler cap and top up with the new gearbox oil, the specifications of which are indicated in the owner's manual!

Watch the video!


by ScegliAuto

More videos