Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
  1. Motorcycles
    2. :
  2. Derbi
    3. : Senda 125

Derbi Senda 125 - Video guides

Derbi Senda 125
How to Replace the Exhaust on a Derbi Senda 125?
You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, next to …Read all…
Posted on 12 April 2026 by ScegliAuto
Derbi Senda 125
How to Remove the Engine from a Derbi Senda 125?
It is possible to remove the engine from the Derbi Senda 125 by taking it out of its housing, loosening the fixing screws that secure it to the respective …Read all…
Posted on 27 March 2026 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that secure the engine block to its housing, then disconnect the connectors and …Read all…
Posted on 15 January 2026 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
It will be possible to disassemble the engine of the Derbi Senda 125 by removing it from its housing, loosening the fastening screws that secure it to its …Read all…
Posted on 10 January 2026 by ScegliAuto
Derbi Senda 125
How do you replace the muffler on the Derbi Senda 125?
It will be possible to replace the exhaust of the Derbi Senda 125 by loosening the screws that secure it to its housing: first, you will need to remove the …Read all…
Posted on 28 December 2025 by ScegliAuto
Derbi Senda 125
How do you remove the engine of the Derbi Senda?
In order to remove the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: to do this, you …Read all…
Posted on 14 November 2025 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
To disassemble the engine of the Derbi Senda 125, you need to loosen the screws that hold it to its housing in the center of the frame: once the fixing screws …Read all…
Posted on 7 November 2025 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
In order to disassemble the engine of the Derbi Senda 125, it is necessary to extract it from its housing by loosening the fixing screws that hold it in place. …Read all…
Posted on 6 September 2025 by ScegliAuto
Derbi Senda 125
How do you replace the exhaust pipe of the Derbi Senda 125?
It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lower part of …Read all…
Posted on 4 May 2025 by ScegliAuto
Derbi Senda 125
How do you replace the exhaust of the Derbi Senda 125?
To replace the exhaust of the Derbi Senda 125, you need to loosen the screws that fix the side panel of the mudguard, located right where the exhaust is: once …Read all…
Posted on 17 April 2025 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
It will be possible to proceed with the disassembly of the engine of the Derbi Senda 125 by extracting it from the inside of its housing, unscrewing the fixing …Read all…
Posted on 28 March 2025 by ScegliAuto
Derbi Senda 125
How do you replace the clutch of the Derbi Senda 125?
In order to replace the clutch of the Derbi Senda 125, you need to loosen the screws that secure the cover on the right side of the motorcycle: this cover can …Read all…
Posted on 7 February 2025 by ScegliAuto
Derbi Senda 125
How do you replace the levers of the Derbi Senda?
To replace the levers, you need to loosen the nut at the end of the cable connected to the lever: this nut can be loosened to release the cable connected to …Read all…
Posted on 30 October 2024 by ScegliAuto
Derbi Senda 125
How do you disassemble the engine of the Derbi Senda 125?
The operation of disassembling the engine of the Derbi Senda 125 involves extracting it from its housing by loosening the fixing screws that hold it to the …Read all…
Posted on 3 August 2024 by ScegliAuto
Derbi Senda 125
How do you replace the sprocket of the Derbi Senda?
In order to replace the sprocket of the Derbi Senda, you need to loosen all the screws that secure the protective panel on the left side: under it you will be …Read all…
Posted on 13 May 2024 by ScegliAuto
Derbi Senda 125
How to replace the exhaust on a Derbi Senda 125?
To replace the exhaust on a Derbi Senda 125, loosen the bolts securing the exhaust at the lower central part of the bike and at the rear side. Once all these …Read all…
Posted on 13 September 2026 by ScegliAuto
Derbi Senda 125
How to Change the Engine Oil on a Derbi Senda 125
The DIY process for changing the engine oil on a Derbi Senda 125 is quite simple; here’s how to quickly perform the service. First, place your bike on a …Read all…
Posted on 4 September 2026 by ScegliAuto
Derbi Senda 125
How to Change the Engine Oil on the Derbi Senda 125?
To change the engine oil on the Derbi Senda 125, loosen the drain plug on the oil sump located at the central lower part of the bike. Once this is unscrewed, …Read all…
Posted on 28 August 2026 by ScegliAuto
Derbi Senda 125
How to Replace the Cylinder on a Derbi Senda 125
To replace the cylinder on a Derbi Senda 125, you need to loosen the screws that secure it to the top of the engine. Once these screws are removed, you can …Read all…
Posted on 16 August 2026 by ScegliAuto
Derbi Senda 125
How to Replace the Wheel Bearings on a Derbi Senda
To replace the wheel bearings on a Derbi Senda, completely remove both wheels by loosening the nuts securing the corresponding central axle: this will allow …Read all…
Posted on 13 August 2026 by ScegliAuto

How to Replace the External Wing Mirror on a Ford C MAX

In the event of a breakage, it will be necessary to replace the external wing mirror on the 2011 Ford C MAX. This operation is easily performed independently. Start by removing the internal cover of the mirror with a plastic lever. Then, use a socket wrench to remove the securing pins. Once the pins are removed, you can take off the mirror, but not before disconnecting the power connectors. Then proceed to fit the new mirror. First, connect the connectors and then secure the mirror to its housing with the pins. Refit the plastic cover and test the operation of the electric mirror using the controls.

Watch the video!


by ScegliAuto

More videos