|
Do it yourself
| |||
| ||||
|
Model: Derbi Senda 125
To replace the exhaust of the Derbi Senda 125, you need to loosen the screws that fix the side panel of the mudguard, located right where the exhaust is: once this panel is removed, you can locate the screws that fix the exhaust pipe to its supports. By unscrewing these screws, you can widen the fixing ring on the exhaust so that it can be completely removed; the new exhaust can then be inserted and fixed with the appropriate screws, covering the side part with the specific panel.
Posted on 17 April 2025 by ScegliAuto
Video tutorial
Related tutorials
Senda 125
It will be possible to replace the exhaust installed on the Derbi Senda 125 by loosening the screws that fix the exhaust terminal in the central lowe…
Senda 125
To replace the exhaust on a Derbi Senda 125, loosen the bolts that secure the exhaust at the lower central part of the bike and at the rear. Once all…
Senda 125
You can replace the exhaust fitted on the Derbi Senda 125 by loosening the screws that secure the cover panel located on the right side of the bike, …
|
How to Replace the Battery in a Yamaha Vino 125 Scooter?
In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.009
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |