Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Kawasaki Z900
Part: Spark plugs

To change the spark plugs on a Kawasaki Z900RS, you must follow a few steps. First of all, make sure the motorcycle engine is cold. Next, locate the spark plugs on the engine, positioned on the top of the engine near the cylinder head. Using a spark plug wrench, carefully unscrew the spark plugs from their housing. Be sure to be careful not to damage the spark plug threads or the cylinder head hole. Before installing the new spark plugs, check that they are the correct size and that the gap (distance between the electrodes) is properly adjusted. Then screw the new spark plugs into the housing, making sure not to tighten them too much to avoid damage. Finally, reconnect the spark plug wires and make sure they are securely connected to the spark plugs themselves. Once the spark plug replacement is complete, start the engine and check that everything is working properly.

Posted on 9 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Spark Plugs and Air Filter of the Kawasaki Z900
How to Replace the Spark Plugs and Air Filter of the Kawasaki Z900
Z900 This guide shows you how to remove and replace the engine spark plugs of the Kawasaki Z900. First, place the motorcycle on a stand and begin by remov…
How to replace the engine oil in the Kawasaki Z900?
How to replace the engine oil in the Kawasaki Z900?
Z900 In this tutorial, we will see how to replace the engine oil in the Kawasaki Z900, an operation that is extremely simple and quick. First of all, let'…
How to replace the engine oil in the Kawasaki Z900?
How to replace the engine oil in the Kawasaki Z900?
Z900 In this tutorial, we will see how to replace the engine oil in the Kawasaki Z900, a very simple and quick operation. First of all, let's make sure th…

How to Reset the Oil Light on a Honda PCX 160

In this mini guide, discover the steps to manually reset the oil light on the central display of your Honda PCX 160. First, turn on the ignition with the key and press both the 'Sel' and 'Set' buttons located below it simultaneously. When the time starts to flash, hold 'Sel' until the oil indicator flashes, then press the 'Set' button once. To complete the reset, hold 'Sel' again until the operation is finished.

Watch the video!


by ScegliAuto

More videos