Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Peugeot Django
Part: Engine

To replace the piston on the Peugeot Django, you need to completely dismantle the side fairings located under the seat: by removing these panels, you will gain access to the engine, which can be extracted from its housing by unscrewing the fixing screws and disconnecting the connectors attached to it. Once the engine is free, loosen the bolts that secure the cylinder at the top, remove the cylinder, and then detach the piston from the corresponding connecting rod. At this point, you can insert the new piston, cover it with the cylinder, and reinstall the engine in its place.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the exhaust pipe of the Peugeot Django?
How do you replace the exhaust pipe of the Peugeot Django?
Django In order to replace the exhaust pipe of the Peugeot Django, you need to start by loosening the screws that hold it to its housing, which is located n…
How to Replace the Seat on a Peugeot Django?
How to Replace the Seat on a Peugeot Django?
Django To replace the seat on a Peugeot Django, open the under-seat compartment so that the seat can be fully lifted. Once the seat is lifted, you can unscr…
How do you remove the rear wheel of the Peugeot Django?
How do you remove the rear wheel of the Peugeot Django?
Django To replace the rear wheel of the Peugeot Django, you will need to first remove the exhaust: this will be located on the right side and must first be …

How to Replace the Battery in a Yamaha FZ6?

Replacing the battery in the Yamaha FZ6, as shown in this tutorial, is a very simple and quick operation. First, ensure that the key is not inserted, then remove the rider's seat and, using a 10mm socket spanner, loosen the bolt on the tank hinge. Next, unscrew both the front bolts and the fairing mounting bolts, lift the entire tank, and disconnect both terminals starting with the negative. At this point, you can remove the upper plastic plate, take the battery out of its housing, and fit the replacement.

Watch the video!


by ScegliAuto

More videos