Do it yourself
Frequently asked questions about cars and motorcycles
In order to replace the exhaust pipe of the Peugeot Django, you need to start by loosening the screws that hold it to its housing, which is located near the rear wheel on the right side of the scooter. Once the support screws are loosened, you can proceed by widening the ring between the exhaust manifold and the pipe. This way, you can remove the old pipe and install the new one: it must be properly connected to the manifold and fixed to the supports, making sure that everything works correctly.

Posted on 22 July 2025 by ScegliAuto

Video tutorial

Related tutorials

Django To replace the exhaust on the Peugeot Django, you need to loosen the screws that secure the exhaust support at its front, just below the footwell of …
Django To replace the rear wheel of the Peugeot Django, you will need to first remove the exhaust: this will be located on the right side and must first be …
Django To replace the engine oil on a Peugeot Django, you need to unscrew the drain plug located at the lower central area of the bike. Once the plug is rem…

Where are the fuses located on the Piaggio Vespa GTS 125?

The fuses of the Piaggio Vespa GTS 125 are located inside the front fairing of the scooter: to access the fuse box, press the ignition switch fully. This will cause the panel located immediately below the ignition switch to open: the fuse box will be positioned inside this panel, in the upper left area. Inside the box, you will find the fuses that control the operation of the front headlamp, the horn, the ABS, etc. After removing the damaged old fuse, insert a new one with the same amperage.

Watch the video!


by ScegliAuto

More videos