Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Exhaust on an Aprilia Sportcity 250

Model: Aprilia Sportcity 250
Part: Exhaust muffler

Video tutorial

To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bottom and top of the exhaust. Once the support screws are loosened, remove the retaining ring that connects the exhaust to the remaining part of the exhaust pipe.

Now, the old exhaust can be completely removed from its housing and replaced with a new spare part; after replacement, check that everything functions correctly.


Updated on 6 August 2026 by ScegliAuto


Related tutorials

Changing the transmission oil of the Aprilia Sportcity 250 ie
Changing the transmission oil of the Aprilia Sportcity 250 ie
Sportcity 250 Here are the necessary instructions to change the transmission oil of the Aprilia Sportcity 250 ie scooter, following these simple and quick steps. F…
Changing the Engine Air Filter on an Aprilia Sportcity 250 Scooter
Changing the Engine Air Filter on an Aprilia Sportcity 250 Scooter
Sportcity 250 Change the engine air filter on an Aprilia Sportcity 250 scooter. Follow this guide to proceed with the filter change. Position the scooter on the ce…
How to Replace the Ignition Relay on an Aprilia Sportcity 250
How to Replace the Ignition Relay on an Aprilia Sportcity 250
Sportcity 250 In this brief and simple guide, you will learn how to disassemble and replace the ignition relay on the Aprilia Sportcity 250 scooter. First, place t…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos