Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Ignition Relay on an Aprilia Sportcity 250

Model: Aprilia Sportcity 250

Video tutorial

In this brief and simple guide, you will learn how to disassemble and replace the ignition relay on the Aprilia Sportcity 250 scooter. First, place the scooter on its centre stand and start by removing the cover and plastic fairing located at the bottom left.

Then, disconnect the wiring from the starter motor by removing the relay connectors, as shown in the video. At this point, replace and install the new relay, using a socket spanner to secure the nuts on the terminals.

Follow the video tutorial to the end for reassembly!


Updated on 10 July 2026 by ScegliAuto


Related tutorials

Sportcity 250 To replace the exhaust on an Aprilia Sportcity 250, loosen the screws that secure the exhaust to its housing: these screws will be located at the bot…
Sportcity 250 Here are the necessary instructions to change the transmission oil of the Aprilia Sportcity 250 ie scooter, following these simple and quick steps. F…
Sportcity 250 In today's tutorial video, you will see the steps to remove the rear wheel from the Aprilia Sportcity 250 scooter, following the instructions below. …

How to Adjust the Clutch on the Honda CBR 600RR?

To adjust the clutch on the Honda CBR 600RR, adjust the bolts located near the clutch lever and near the clutch cover: by tightening these bolts, you will notice that the left lever becomes stiffer, making it more difficult for the clutch to disengage. Conversely, by loosening these bolts, the clutch lever will become softer, making it easier for the clutch to engage. Once the adjustment is made, check that the clutch does not cause any issues while riding.

Watch the video!


by ScegliAuto

More videos