Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil of a Kawasaki Z900?

Model: Kawasaki Z900
Part: Engine oil

Video tutorial

To change the motor oil of a Kawasaki Z900, make sure the motorcycle is positioned on a stable and flat surface, preferably using the center stand or a stand to maintain balance. Before starting, warm up the engine for a few minutes to make the oil more fluid and facilitate drainage.

Turn off the engine and locate the oil drain plug, located under the engine block. Using a suitable wrench, carefully loosen and remove the plug, being careful not to burn yourself.

Allow the used oil to completely drain into a suitable recycling container. Once finished, reposition the plug and tighten it carefully to avoid leaks.

Finally, add the correct amount of new oil, following the specifications indicated in the manual, and check the level with the dipstick or sight glass. Make sure everything is securely closed before restarting the engine to verify proper operation.


Posted on 16 November 2025 by ScegliAuto


Related tutorials

How to Change the Engine Oil in a Kawasaki Z900?
How to Change the Engine Oil in a Kawasaki Z900?
Z900 In this tutorial, you will see how to change the engine oil in a Kawasaki Z900, a very simple and quick operation to perform every 12 months. First, …
How to Replace the Engine Oil and Oil Filter on the Kawasaki Z900
How to Replace the Engine Oil and Oil Filter on the Kawasaki Z900
Z900 Regular maintenance is essential for the proper functioning of the engine; here’s how to perform it on the Kawasaki Z900. First, place the motorcycle…
How to replace the engine oil in the Kawasaki Z900?
How to replace the engine oil in the Kawasaki Z900?
Z900 In this tutorial, we will see how to replace the engine oil in the Kawasaki Z900, an operation that is extremely simple and quick. First of all, let'…

How to replace the piston on the Peugeot Django?

To replace the piston on the Peugeot Django, you need to completely dismantle the side fairings located under the seat: by removing these panels, you will gain access to the engine, which can be extracted from its housing by unscrewing the fixing screws and disconnecting the connectors attached to it. Once the engine is free, loosen the bolts that secure the cylinder at the top, remove the cylinder, and then detach the piston from the corresponding connecting rod. At this point, you can insert the new piston, cover it with the cylinder, and reinstall the engine in its place.

Watch the video!


by ScegliAuto

More videos