Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is removed, moving the chain as well, you can locate the shaft seals positioned at the bottom of the sprocket. Using a tool like a screwdriver, pry out the old seals from their housing and replace them with new spare parts. After replacement, reinstall the sprocket and the corresponding chain, ensuring everything functions correctly.

Updated on 6 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Remove the Engine from the GasGas EC 125
How to Remove the Engine from the GasGas EC 125
Ec 125 To remove the engine from the GasGas EC 125, extract the engine block from its housing after loosening the mounting bolts of the respective supports.…
How to Replace the Cylinder on a GasGas EC 125
How to Replace the Cylinder on a GasGas EC 125
Ec 125 To replace the cylinder on a GasGas EC 125, first loosen the screws securing the seat to its housing, which will also detach the side panels located …
How to Dismantle the Engine of the GasGas EC 125?
How to Dismantle the Engine of the GasGas EC 125?
Ec 125 The operation of dismantling the engine of the GasGas EC 125 is carried out by accessing the central part of the bike immediately under the seat. To …

How to Replace the Front Headlight on the Husqvarna 701?

In this tutorial, you will see how to replace the front headlight on the Husqvarna 701, a very simple and quick operation. First, ensure that the key is not inserted, then position yourself in front of the motorcycle, locate the four bolts on either side of the headlamp, and unscrew them using a Torx T30 key. Next, pull the entire assembly towards you, separate it from the support, and disconnect the power connector. At this point, you can separate the headlight from the panel, position the replacement, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos