|
Do it yourself
| |||
| ||||
Model: Gasgas Ec 125
To remove the engine from the GasGas EC 125, extract the engine block from its housing after loosening the mounting bolts of the respective supports. You will also need to disconnect all connectors attached to the engine to completely remove the block: before disassembling it, detach the piston from its conrod by widening the securing ring. At this point, loosen the additional screws that secure the two half-casings to access the internal components and replace them if necessary.
Updated on 11 August 2026 by ScegliAuto
Video tutorial
Related tutorials
Ec 125
The operation of dismantling the engine of the GasGas EC 125 is carried out by accessing the central part of the bike immediately under the seat. To …
Ec 125
To replace the cylinder on a GasGas EC 125, first loosen the screws securing the seat to its housing, which will also detach the side panels located …
Ec 125
To replace the shaft seals on the GasGas EC 125, loosen the nut that secures the sprocket, located on the left side of the bike. Once the sprocket is…
|
How to reset the oil light on the Honda SH 125
If the oil light appears on your Honda SH 125 dashboard despite having recently changed the oil, don't worry as you can resolve this minor issue with a simple manual reset procedure. First, turn on the ignition and hold down the "Info A" and "Info B" buttons located at the bottom of the left knob. At this point, press the "Info B" button multiple times until the oil change indicator starts to flash. Finally, press the "Info A" button once to perform the reset. The procedure is now complete. by ScegliAuto More videos
|
|
For advertising on this site Write to info@scegliauto.com
ScegliAuto is not responsible for any inaccuracy of the data in the lists. To report any inaccuracy or your business (if you own the business in question), please write to info@scegliauto.com
Number of seconds to generate the page: 0.006
(c) ScegliAuto 2026 - info@scegliauto.com - Privacy policy VAT number: IT01247470535 |
