Do it yourself
Frequently asked questions about cars and motorcycles

How to change the engine oil of an Aprilia Dorsoduro 750?

Model: Aprilia Dorsoduro 750
Part: Engine oil

Video tutorial

Changing the motor oil of an Aprilia Dorsoduro 750 is an operation that requires attention and precision to ensure the correct functioning of the engine. First of all, it is important to make sure that the motorcycle is on a flat and stable surface, preferably using a center stand or suitable support.

The engine should be slightly warm to allow the oil to flow better, so start it for a few minutes and then turn it off. Locate the oil drain plug located at the bottom of the engine and place a container to collect the old oil. Unscrew the plug using a suitable wrench and let the oil drain completely.

In the meantime, remove the filler cap to facilitate the flow.

Once drained, replace the gasket of the drain plug if necessary, then tighten it securely. Proceed by pouring the new oil using a funnel to avoid spills, making sure to respect the quantity and specification indicated in the motorcycle manual.

After completing the filling, start the engine for a few minutes and check the level with the appropriate dipstick or indicator. Adjust if necessary and dispose of the used oil following local regulations.


Posted on 12 December 2024 by ScegliAuto


Related tutorials

Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, which is located at the bottom of the bike: p…
Dorsoduro 750 To perform the oil change on the Aprilia Dorsoduro 750, you will need to loosen the drain plug of the oil pan located in the central lower part of th…
Dorsoduro 750 To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike:…

Replacing the Front Brake Pads on the Triumph Daytona 675

The following instructions will allow you to remove and replace the front brake pads on the Triumph Daytona 675. First, place the bike on a stand and begin undoing the fixing screws of the front brake caliper; apply pressure to the caliper piston to retract it, thus removing the old brake pads, as shown in the video. At this point, clean the caliper of any residual dirt, then install the new original brake pads; reattach the caliper to the disc, replacing the other brake pads in the same manner!

Watch the video!


by ScegliAuto

More videos