Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To perform the oil change on the Aprilia Dorsoduro 750, you will need to loosen the drain plug of the oil pan located in the central lower part of the vehicle. Once this plug has been removed, it will be possible to drain all the old oil into a properly positioned container. At this point, you can also remove the oil filter, which will be in the same area, in order to insert the new replacement piece. Then, you can proceed by topping up the oil by pouring the correct amount through the vent on the right side of the motorcycle.

Posted on 17 March 2025 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on an Aprilia Dorsoduro 750
How to Change the Engine Oil on an Aprilia Dorsoduro 750
Dorsoduro 750 To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike:…
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, which is located at the bottom of the bike: p…
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
Dorsoduro 750 Today we will look at how to carry out routine maintenance by replacing the engine oil and oil filter on the Aprilia Dorsoduro 750. First, place the …

How to replace the air filter in the Herald Classic 125?

In this tutorial, you will see how to replace the air filter in the Herald Classic 125, a very simple and quick operation. First, position yourself on the left side of the motorcycle, then grab the panel located under the seat, pull it towards you, and detach it from the frame. Next, unscrew the three fastening screws of the airbox cover, remove it, and take out the old filter from its housing. At this point, remove any dirt residue present, insert the replacement filter, and reassemble everything by following the reverse procedure.

Watch the video!


by ScegliAuto

More videos