Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750

Model: Aprilia Dorsoduro 750
Part: Engine oil

Video tutorial

Today we will look at how to carry out routine maintenance by replacing the engine oil and oil filter on the Aprilia Dorsoduro 750. First, place the bike on its stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge, replacing it with a new original one (screwing it in gently).

At this point, unscrew the filler cap to top up with new engine oil until reaching the maximum level mark.


Posted on 14 April 2026 by ScegliAuto


Related tutorials

How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
Dorsoduro 750 Today's process will show us how to perform the routine maintenance check, replacing the motor oil and oil filter of the Aprilia Dorsoduro 750 motorc…
How to Change the Engine Oil on an Aprilia Dorsoduro 750
How to Change the Engine Oil on an Aprilia Dorsoduro 750
Dorsoduro 750 To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike:…
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, which is located at the bottom of the bike: p…

How to Replace the Front Headlamp Bulb on a Suzuki GSX-R 600

Today's instructions will show you the steps to remove and replace the front headlamp bulb on the Suzuki GSX-R 600 motorcycle. First, place the bike on a stand and begin by removing the plastic cover protecting the bulb, located behind the headlamp and the instrument cluster; then disconnect the electrical connector and unclip the metal spring, as shown in the video. At this point, remove and replace the bulb with a new one of the correct type and fitting; then refit the bulb and turn on the ignition to check its operation!

Watch the video!


by ScegliAuto

More videos