Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on an Aprilia Dorsoduro 750

Model: Aprilia Dorsoduro 750
Part: Engine oil

Video tutorial

To change the engine oil on an Aprilia Dorsoduro 750, you need to unscrew the drain plug of the oil tank, which is located at the bottom of the bike: underneath it, place a container to catch the used oil. Once all the oil has drained out, you can remove the oil filter located next to the drain plug, replacing it with a new one. Once the oil filter has been replaced, you can top up by adding new oil: this will be added through the designated breather on the right side of the bike.


Updated on 2 June 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on the Aprilia Dorsoduro 750?
How to Change the Engine Oil on the Aprilia Dorsoduro 750?
Dorsoduro 750 You can change the engine oil on the Aprilia Dorsoduro 750 by loosening the drain plug on the oil sump, located at the central lower part of the bike…
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
How to Replace the Engine Oil and Oil Filter on Aprilia Dorsoduro 750
Dorsoduro 750 Today we will look at how to carry out routine maintenance by replacing the engine oil and oil filter on the Aprilia Dorsoduro 750. First, place the …
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
How to replace the engine oil and oil filter of the Aprilia Dorsoduro 750
Dorsoduro 750 Today's process will show us how to perform the routine maintenance check, replacing the motor oil and oil filter of the Aprilia Dorsoduro 750 motorc…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

How to Reset the Engine Light on a Yamaha Ray RZ?

To reset the engine light on a Yamaha Ray RZ, connect a diagnostic tool to the vehicle's OBD port. The OBD port is located just above the battery housing, accessible by removing the panel in the centre of the footwell. Once this panel is removed, connect the scanner and select the car model and its corresponding version. After connecting the scanner and following the tutorial steps, you will notice that the light has been reset.

Watch the video!


by ScegliAuto

More videos