Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Replace the Front Headlight Bulb on a Benelli Motobi 200 EVO?

Model: Benelli Motobi 200 Evo
Part: Headlight bulb

Video tutorial

In this tutorial, you will see how to replace the front headlight bulb on a Benelli Motobi 200 EVO, a very simple and quick operation. Before proceeding, ensure that the key is not inserted for safety.

Start by positioning yourself in front of the headlight in question, then unscrew the two screws located at the bottom and separate it from the base. Next, disconnect the power connector, unclip the metal clip, and remove the old bulb from the housing.

To install the replacement and reassemble everything, simply follow the reverse procedure.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Benelli Motobi 200 Evo?
How to Change the Engine Oil on a Benelli Motobi 200 Evo?
Motobi 200 Evo To change the engine oil on a Benelli Motobi 200 Evo, loosen the drain plug located under the oil sump: these components are situated at the central …
How to change the engine oil in the Benelli Motobi 200 Evo?
How to change the engine oil in the Benelli Motobi 200 Evo?
Motobi 200 Evo The engine oil in the Benelli Motobi 200 Evo can be replaced by loosening the drain plug located under the oil sump: these components will be situate…
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
Motobi 200 Evo To replace the rear brake pads of the Benelli Motobi 200 Evo, you need to loosen the screws that secure the rear brake caliper to its disc. Once the …
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Kymco Downtown 300 ECU

If you experience irregular power delivery and idle levels leading to stalling, try resetting the ECU. Turn the ignition key to position one, wait ten seconds, and rotate the right throttle knob to full throttle. Keep it turned for ten seconds and then return it to the resting position. After a few seconds, you will see the "engine malfunction" light briefly flash on the rev counter. Turn off the instruments and start the engine; take it for a test ride to ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos