Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to change the engine oil in the Benelli Motobi 200 Evo?

Model: Benelli Motobi 200 Evo
Part: Engine oil

Video tutorial

The engine oil in the Benelli Motobi 200 Evo can be replaced by loosening the drain plug located under the oil sump: these components will be situated in the central lower part of the vehicle. Once the plug is removed, you can collect the used oil in a container placed underneath; when the oil has drained out, you can then remove the oil filter located in the same spot and insert a new one. Finally, top up by adding the necessary amount of oil through the breather located on the right side of the vehicle.


Updated on 31 October 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Benelli Motobi 200 Evo?
How to Change the Engine Oil on a Benelli Motobi 200 Evo?
Motobi 200 Evo To change the engine oil on a Benelli Motobi 200 Evo, loosen the drain plug located under the oil sump: these components are situated at the central …
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
Motobi 200 Evo To replace the rear brake pads of the Benelli Motobi 200 Evo, you need to loosen the screws that secure the rear brake caliper to its disc. Once the …
How to Replace the Front Headlight Bulb on a Benelli Motobi 200 EVO?
How to Replace the Front Headlight Bulb on a Benelli Motobi 200 EVO?
Motobi 200 Evo In this tutorial, you will see how to replace the front headlight bulb on a Benelli Motobi 200 EVO, a very simple and quick operation. Before proceed…
ScegliAuto offers an extensive international collection of automotive tutorials available in 12 languages. Each guide combines instructional videos with original explanations written by experienced human editors, along with information about the car models covered.

Resetting the Kymco Downtown 300 ECU

If you experience irregular power delivery and idle levels leading to stalling, try resetting the ECU. Turn the ignition key to position one, wait ten seconds, and rotate the right throttle knob to full throttle. Keep it turned for ten seconds and then return it to the resting position. After a few seconds, you will see the "engine malfunction" light briefly flash on the rev counter. Turn off the instruments and start the engine; take it for a test ride to ensure everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos