Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
In order to replace the engine oil of the Benelli Motobi 200 Evo, you need to loosen the drain plug located under the oil pan: these components are located in the central lower part of the vehicle. Once the plug is removed, it will be possible to collect the used oil in a properly positioned container; once the oil has drained, you can then remove the oil filter located in the same position, and replace it with a new one. Finally, you can top up the oil by adding the necessary amount through the vent located on the right side of the motorcycle.

Posted on 14 May 2024 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the engine oil of the Benelli Motobi 200 Evo?
How do you replace the engine oil of the Benelli Motobi 200 Evo?
Motobi 200 Evo The motor oil present inside the Benelli Motobi 200 Evo can be replaced by loosening the drain plug located under the oil pan: these components will …
How to Replace the Front Headlight Bulb on a Benelli Motobi 200 EVO?
How to Replace the Front Headlight Bulb on a Benelli Motobi 200 EVO?
Motobi 200 Evo In this tutorial, you will see how to replace the front headlight bulb on a Benelli Motobi 200 EVO, a very simple and quick operation. Before proceed…
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
How to replace the rear brake pads of the Benelli Motobi 200 Evo?
Motobi 200 Evo To replace the rear brake pads of the Benelli Motobi 200 Evo, you need to loosen the screws that secure the rear brake caliper to its disc. Once the …

How to Replace the Battery in a Yamaha Vino 125 Scooter?

In this tutorial, you will see how to replace the battery in a Yamaha Vino 125 scooter, a very simple and quick operation. First, ensure that the key is not inserted for safety. Then, lift the rubber mat and, using a simple cross-head screwdriver, unscrew the two screws securing the plastic cover. Once opened, disconnect both terminals, starting with the negative, and remove the battery from its housing. To fit the replacement, simply follow the reverse procedure.

Watch the video!


by ScegliAuto

More videos