Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the headlight bulb on the Sym Bonus 110, you must completely remove the front fairing of the motorcycle, which will need to be taken off by unscrewing the screws located above the handlebars. Once these screws are removed, you can detach the fairing and disconnect the connectors inside the headlight unit: this will allow you to pull out the bulb from its housing, so it can be replaced with a new spare part. After the replacement, you can reassemble all the components previously removed.

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How do you replace the front headlight bulb of the Sym Bonus 110?
How do you replace the front headlight bulb of the Sym Bonus 110?
Bonus 110 The headlight bulb of the Sym Bonus 110 can be replaced by completely disassembling the front fairing of the motorcycle, which must be removed from i…
How do you replace the front headlight bulb of the Sym Bonus 110?
How do you replace the front headlight bulb of the Sym Bonus 110?
Bonus 110 On the Sym Bonus 110, the replacement of the front headlight bulb is done by completely removing the front fairing of the motorcycle, which can be re…
How to Replace the Headlight Bulb on a Sym Bonus 110?
How to Replace the Headlight Bulb on a Sym Bonus 110?
Bonus 110 To replace the headlight bulb on a Sym Bonus 110, you need to completely remove the front fairing of the motorcycle, which must be detached from its …

How to Replace the Engine Cover on a Honda CB 650R

This guide provides instructions for removing and replacing the engine cover on a Honda CB 650R motorcycle, following these simple steps. First, place your motorcycle on the centre stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes. Then, unscrew all the screws from the cover or engine casing found on the right, as shown in the video. At this point, install the new cover, ensuring to replace the gasket and clean the base thoroughly.

Watch the video!


by ScegliAuto

More videos