Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer?

Model: Triumph Tiger 1200 Rally Explorer
Part: Transmission fluid

Video tutorial

In this tutorial we can see how to replace the transmission oil in the Triumph Tiger 1200 Rally Explorer, a very simple and fast operation. First of all, we wait for the engine to be cold enough, then we position a container under the final area of the transmission case.

We then locate both the drain plug and the fill plug, unscrew them using an 8mm hex key, and let all the oil in the system drain out. At this point, all that remains is to tighten the lower plug and fill the new oil.


Posted on 1 December 2024 by ScegliAuto


Related tutorials

How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
How do you replace the engine oil of the Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the engine oil of the Triumph Tiger 1200 Rally Explorer, you will need to unscrew the drain plug of the oil pan located in the central low…
How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer
How to Change the Engine Oil in the Triumph Tiger 1200 Rally Explorer
Tiger 1200 Rally Explorer In this tutorial, you will see how to change the engine oil in the Triumph Tiger 1200 Rally Explorer, a very simple and quick operation. First, ensur…
How to Replace the Rear Brake Pads on a Triumph Tiger 1200 Rally Explorer?
How to Replace the Rear Brake Pads on a Triumph Tiger 1200 Rally Explorer?
Tiger 1200 Rally Explorer To replace the rear brake pads on the Triumph Tiger 1200 Rally Explorer, loosen the screws that secure the brake caliper to the corresponding disc: o…

How to Replace the Exhaust on the Suzuki GSX-R 600

To replace the exhaust on the Suzuki GSX-R 600, loosen the screws that secure the exhaust end can to its housing, located near the rear wheel on the right side of the bike. At this point, you can proceed by widening the connecting ring between the exhaust and the collector. Next, completely detach the old exhaust to position the new one: connect it to the collector by reinserting the ring and securing it to the bike's side supports.

Watch the video!


by ScegliAuto

More videos