Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Replacing the motor oil in the Suzuki GSX-S1000, as we can see in this tutorial, is an extremely simple and quick operation. First of all, make sure that the engine is cool enough, then place a container underneath it and remove the lower fairing. Next, locate the drainage hole bolt, unscrew it using a socket wrench, and let all the oil in the system drain out. At this point, all that's left to do is to unscrew the old filter, tighten both the replacement and the bolt, and pour in the new oil through the appropriate hole.

Posted on 1 December 2024 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil in the Suzuki GSX-S1000?
How to Change the Engine Oil in the Suzuki GSX-S1000?
Gsx S 1000 .. how to change the engine oil in the Suzuki GSX-S1000, a very simple and quick operation. First, wait until the engine is cool enough to operate safely,.. …
How to change the engine oil in the Suzuki GSX-S1000?
How to change the engine oil in the Suzuki GSX-S1000?
Gsx S 1000 .. how to change the engine oil in the Suzuki GSX-S1000, a very simple and quick operation. First, ensure that the engine is cool enough to operate safely,.. …
How to replace the engine oil in the Suzuki GSX-S1000?
How to replace the engine oil in the Suzuki GSX-S1000?
Gsx S 1000 .. In this tutorial, we can see how to replace the engine oil in the Suzuki GSX-S1000, an extremely simple and quick operation. First.. …

How to Check the Coolant Level in a Yamaha Xmax

In the following video, you will learn how to check the coolant level in a 2008 Yamaha Xmax. First, position the motorcycle on a stable surface by raising the stand. Next, lift the cover located at the top of the motorcycle to access the coolant drain bolt. To top up the coolant, unscrew the cap as shown in the video and add the fluid until it reaches the maximum level, indicated as Max. Once finished, close the valve and refit the cover. At this point, start the engine and let it run at idle for a few minutes to eliminate any air bubbles that may have formed inside.

Watch the video!


by ScegliAuto

More videos