Do it yourself
Frequently asked questions about cars and motorcycles

How to Replace the Water Pump on the Malaguti Spidermax GT 500

Model: Malaguti Spidermax Gt 500
Part: Pump

Video tutorial

To replace the water pump on the Malaguti Spidermax GT 500, loosen the screws securing the cover on the right side of the vehicle. Underneath, you will find the stator, which can be removed from its housing.

Once the stator is extracted, locate the water pump underneath and remove it from its seat by loosening the securing bolts and disconnecting the hoses. At this point, insert the new water pump and check that everything functions correctly.


Updated on 5 August 2026 by ScegliAuto


Related tutorials

Spidermax Gt 500 To replace the switch panel of the Malaguti Spidermax GT 500, you need to loosen the screws that secure it to its housing on the left side of the han…
Spidermax Gt 500 To replace the exhaust on a Malaguti Spidermax GT 500, start by removing the old exhaust, loosening the connecting clamp, and unscrewing the bolts th…
Spidermax Gt 500 To replace the clutch of the Malaguti Spidermax GT 500, you need to loosen the screws that fix the transmission casing located on the left side, next…

How to Remove and Install the Rear Wheel of the Triumph Tiger 900

This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centre stand and begin loosening the central bolt of the rear wheel using a socket spanner with an extension; then disconnect the brake caliper and the drive chain, gently removing the wheel, as shown in the video. At this point, if necessary, replace the tyre, sprocket, or rear brake disc; apply the reverse procedure for reassembly!

Watch the video!


by ScegliAuto

More videos