Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Triumph Tiger 900
Part: Wheel

This guide briefly provides the instructions to remove and install the rear wheel of the Triumph Tiger 900. First, place your motorcycle on the centre stand and begin loosening the central bolt of the rear wheel using a socket spanner with an extension; then disconnect the brake caliper and the drive chain, gently removing the wheel, as shown in the video. At this point, if necessary, replace the tyre, sprocket, or rear brake disc; apply the reverse procedure for reassembly!

Updated on 9 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Reset the Service on the Triumph Tiger 900?
How to Reset the Service on the Triumph Tiger 900?
Tiger 900 In this tutorial, you will learn how to reset the service on the Triumph Tiger 900, a very simple and quick operation to perform only after completin…
How to Replace the Clutch of the Triumph Tiger 900
How to Replace the Clutch of the Triumph Tiger 900
Tiger 900 In this video tutorial, you will learn how to dismantle and replace the clutch discs of the Triumph Tiger 900 enduro motorcycle. First, place your mo…
How to Replace the Rear Shock Absorber on a Triumph Tiger 900?
How to Replace the Rear Shock Absorber on a Triumph Tiger 900?
Tiger 900 To replace the shock absorber on the Triumph Tiger 900, loosen the screws that secure it from the bottom and those that secure it from the top. These…

How to Remove the Rear Wheel on the BMW G650 GS?

In this tutorial, you will see how to remove the rear wheel on the BMW G650 GS, a very simple operation. First, lift the motorcycle from the central area using a stand or a jack, then undo the right nut with a 24 mm socket and the left one with a 19 mm spanner. Once done, using a Torx T40 key, unscrew the two chain tensioner bolts exactly half a turn each, until you loosen the tension. Finally, push the wheel towards the inside of the motorcycle, remove the chain from the sprocket, and extract the inner pin using a hammer.

Watch the video!


by ScegliAuto

More videos