Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

How to Change the Engine Oil on a Suzuki Burgman 650 Scooter?

Model: Suzuki Burgman 650
Part: Engine oil

Video tutorial

In this tutorial, you will see how to change the engine oil on a Suzuki Burgman 650 scooter, an extremely simple and quick operation to perform every 12 months. First, ensure that the engine is sufficiently cool, then position a container underneath the scooter, locate the drain bolt, and unscrew it with a 17mm socket.

Allow all the oil contained in the engine to drain out, unscrew the old filter, and tighten the replacement. At this point, you can reassemble everything, open the left lower panel, and add the necessary amount of oil through the designated hole.


Updated on 9 August 2026 by ScegliAuto


Related tutorials

How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
Burgman 650 .. In this tutorial, we will see how to change the engine oil on a Suzuki Burgman 650 scooter, a very simple and quick operation. First,.. …
How to Drain and Refill the Coolant on the Suzuki Burgman 650
How to Drain and Refill the Coolant on the Suzuki Burgman 650
Burgman 650 Below are the main instructions to drain and refill the coolant on the Suzuki Burgman 650 scooter. First, place the scooter on the centre stand and s…
How to replace the battery in the Suzuki Burgman 650 scooter?
How to replace the battery in the Suzuki Burgman 650 scooter?
Burgman 650 Replacing the battery in the Suzuki Burgman 650 scooter, as shown in this tutorial, is an extremely simple and quick task. First, ensure that the key…

How to Remove the Rear Wheel of the Triumph Tiger 800

To remove the rear wheel of the Triumph Tiger 800, loosen the nuts located in the centre of the wheel that secure the central axle to the end of the swingarm. Once these two nuts are removed, unscrew the bolts that secure the rear brake caliper, detaching it from the disc; you will also need to move the chain from the corresponding sprocket. When all these components have been removed, it will be possible to completely detach the wheel, allowing you to insert a new replacement part, reassembling all previously removed components.

Watch the video!


by ScegliAuto

More videos