Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
Below are the main instructions to drain and refill the coolant on the Suzuki Burgman 650 scooter. First, place the scooter on the centre stand and start unscrewing the coolant drain screw located under the engine; let it drain into a container for about ten minutes. Next, unscrew the radiator filler cap and refill with new antifreeze (of the suitable type); pour the correct amount until reaching the maximum level mark!

Updated on 18 September 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
How to Change the Engine Oil on a Suzuki Burgman 650 Scooter
Burgman 650 In this tutorial, we will see how to change the engine oil on a Suzuki Burgman 650 scooter, a very simple and quick operation. First, ensure the engi…
How to Change the Engine Oil on a Suzuki Burgman 650
How to Change the Engine Oil on a Suzuki Burgman 650
Burgman 650 Start by placing your Suzuki Burgman 650 on the centre stand. Next, turn on the engine and let it run for a few minutes to help the oil drain out mor…
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos