Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Model: Suzuki Burgman 650
Part: Pump

In today's tutorial video, you will learn how to remove and replace the coolant pump on the Suzuki Burgman 650 scooter. First, place the scooter on its stand and start by removing the coolant hose connected to the water pump by loosening the clamp screw. Then, use a socket spanner to unscrew and remove the screws from the pump cover, as shown in the video. At this point, remove the coolant pump assembly and replace it with the new one (using the original spare part); finally, reassemble everything!

Updated on 7 June 2026 by ScegliAuto

Video tutorial

Related tutorials

How to reset the oil warning light on the Suzuki Burgman 650
How to reset the oil warning light on the Suzuki Burgman 650
Burgman 650 If you have just changed the oil on the Suzuki Burgman 650 and still notice the oil warning light is on, do not worry; simply perform the following r…
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
How to Replace the Front Headlight Bulb on a Suzuki Burgman 650
Burgman 650 Before starting, position your Suzuki Burgman 650 on the centre stand. Begin by removing the front inner fairing by unscrewing the screws and unclipp…
How to Reset the Oil Light on the Suzuki Burgman 650
How to Reset the Oil Light on the Suzuki Burgman 650
Burgman 650 If you have just performed an oil change on your Suzuki Burgman 650 and do not know how to manually reset the related warning light, then this guide …

Changing the Oil and Filter on the Kawasaki Versys

Here’s how to change the oil and filter on the Kawasaki Versys. Warm up the engine for a few minutes, place the motorcycle on the centre stand, open the filler cap, and remove the drain plug underneath the engine. Place a catch basin under the oil sump, unscrew the drain plug, and let the oil drain out. Unscrew the oil filter and let all the old oil drain out. Install a new filter and tighten it with the appropriate tool. Pour half a glass of new oil into the filler cap and wait for it to flow out of the drain hole, after which replace the plug. Fill with approximately 1.8 litres of new oil, take it for a short ride to circulate the oil in the engine, stop the engine, and check the level through the designated window. Top up if necessary.

Watch the video!


by ScegliAuto

More videos