Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions
To replace the gear oil of the Piaggio Vespa PX 125, loosen the drain plug of the oil reservoir located at the bottom of the transmission casing on the right side of the scooter. Once the plug is loosened, collect all the used oil in a suitably positioned container until it has completely drained. Now, top up the oil through the breather located on the transmission casing using a pump. After adding the new oil, you can start the engine to check that everything is functioning properly.

Updated on 5 August 2026 by ScegliAuto

Video tutorial

Related tutorials

How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this brief and simple guide, you will learn how to replace the transmission oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke.…
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 In this video tutorial, you will learn how to remove and replace the transmission oil on the Piaggio Vespa Px 125, as well as on the Lml Star 125. Fi…
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 In today's tutorial, you will see the procedure for removing and replacing the rear wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 an…

Replacing the Front Brake Pads on the Piaggio Vespa 50 LX

This guide will illustrate the instructions on how to remove and replace the front brake pads on the Piaggio Vespa 50 LX. First, place your scooter on the centre stand and start unscrewing the nuts securing the front wheel to remove it; then use pliers to remove the brake pad retaining clip, as shown in the video. At this point, remove the old pads, cleaning the caliper of dirt; press the caliper piston back to allow for the installation of the new pads (of excellent quality). Finally, reassemble the front wheel.

Watch the video!


by ScegliAuto

More videos