Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Changing the Transmission Oil on the Piaggio Vespa Px 125 - Lml Star 125

Model: Piaggio Vespa Px 125
Part: Transmission fluid

Video tutorial

In this video tutorial, you will learn how to remove and replace the transmission oil on the Piaggio Vespa Px 125, as well as on the Lml Star 125. First, place it on the central stand and start unscrewing the oil drain bolt located under the gearbox casing (engine side); then allow the oil to drain into a container for about ten minutes, as shown in the video.

At this point, unscrew the filler cap located at the top and top up with new engine oil of the correct type (in this case, a 10w40), filling to the maximum level!


Updated on 21 May 2026 by ScegliAuto


Related tutorials

How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
How to Replace the Rear Suspension on a Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. on a Piaggio Vespa PX 125, as well as on an Lml Star 125. First, place the central stand and begin to lift the rear wheel off the ground; then use.. …
Replacing the Battery on a Piaggio Vespa PX 125 - LML Star 125
Replacing the Battery on a Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. on the Piaggio Vespa PX 125, as well as the LML Star 125, in simple steps. First, lift the seat and open the two levers of the left storage compartment.. …
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
How to Remove the Handlebar Cover and Front Headlight on the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. front headlight on the Piaggio Vespa PX 125 and Lml Star 125. First, place the bike on its central stand and begin unscrewing the screws securing the.. …

How to Replace the Exhaust on a Malaguti Spidermax GT 500?

To replace the exhaust on a Malaguti Spidermax GT 500, start by removing the old exhaust, loosening the connecting clamp, and unscrewing the bolts that secure it to its housing. This will allow you to remove the old exhaust and insert the new one, which must be connected to the exhaust system. Secure it by attaching the fixing clamp and connecting the exhaust to the support bracket at the top and bottom. Once the new exhaust is installed, you can start the bike and check that everything is functioning correctly.

Watch the video!


by ScegliAuto

More videos