Do it yourself
Frequently asked questions about cars and motorcycles
Car tutorial (Do it yourself) Motorcycle tutorial (Do it yourself) Frequently Asked Questions

Replacing the Battery on a Piaggio Vespa PX 125 - LML Star 125

Model: Piaggio Vespa Px 125
Part: Battery

Video tutorial

In this brief video, you will see how to remove and replace the battery on the Piaggio Vespa PX 125, as well as the LML Star 125, in simple steps. First, lift the seat and open the two levers of the left storage compartment to remove it; this gives you access to the battery, as shown in the video.

Next, unscrew the terminal screws (positive and negative) and unfasten the central strap; now remove the battery and replace it with a new one (of the correct type and with the same amperage). Finally, reassemble everything by following the reverse procedure!


Updated on 19 April 2026 by ScegliAuto


Related tutorials

How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
How to Replace the Gear Oil of the Piaggio Vespa Px 125 - Lml Star 125
Vespa Px 125 .. oil of the Piaggio Vespa Px 125, as well as the Lml Star 125 2-stroke. First, place the central stand and start unscrewing the oil drain bolt located.. …
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Replacing the Spark Plug of the Piaggio Vespa PX 125 - LML Star 125
Vespa Px 125 .. plug of the Piaggio Vespa PX 125, as well as the LML Star 125. First, place the central stand and start removing the right side case by turning the small.. …
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
How to Change the Rear Wheel of the Piaggio Vespa PX 125 - Lml Star 125
Vespa Px 125 .. wheel of the Piaggio Vespa PX 125, as well as the Lml Star 125 and 150. First, place the central stand and start by removing the left side storage box;.. …

How to Change the Engine Oil and Oil Filter on the Ducati Hypermotard

Discover the steps to perform routine maintenance by changing the engine oil and oil filter on the Ducati Hypermotard. First, place your motorcycle on a stand and start by unscrewing the oil drain bolt located under the engine, allowing it to drain into a container for about ten minutes; then unscrew the oil filter cartridge located right next to it using the appropriate tool, as shown in the video. At this point, install the new filter and unscrew the filler cap, pouring in the suitable oil for your engine!

Watch the video!


by ScegliAuto

More videos